Laser marking machine laser cutting machine galvanometer scanner head with analog singal and digital signal
Basic Info
Model No.: JS2808 analog galvanometer
Product Description
Laser Marking Machine Laser Cutting Machine Galvanometer Scanner head with analog singal and digital signal
1.Designed with analog and digital interface;
2.The input aperture is 20mm.
3.Zero drift, higher speed, lower temperature and stronger anti-interference, etc.
4.It is widely used in different industrial applications including precision Laser marking, laser cutting, laser welding, laser drilling, rapid photographing and science researches, etc
Motor Specification of JS2808 analog galvanometer:
Working Temperature | 0-45°C |
Linearity | 99.9% |
Setting Time | ≤0.8ms |
Scale Drift | 40PPM/°C |
Zero Drift | <15μRad./°C |
Long-term Drift Over 8 Hours | <0.5mRad |
RMS Current | 2A |
Peak Current | 20A(Max) |
Maximum Scan Angle | ±15° |
Storage Temperature | -10 to +60°C |
Resolution | 12μrad |
Repeatability | ≤8μrad |
Input Aperture | 20mm |
Beam Displacement | 26mm |
Motor Weight | 280g |
Frequency | ≤400Hz |
Servo Driver Board Specification of analog galvanometer:
Input Voltage MAX.RMS | ±15VDC | |
Interface Signals | Analog | ±5V, ±10V |
Digital | XY2-100 | |
Analog Signal Input Resistance | 200K±1%Ω | |
Position Signal Input Resistance | 1K±1%Ω | |
Position Signal Input Scale Factor | 0.33V/° | |
Position Signal Output Scale Factor | 0.33V/° | |
Working Temperature | 0-45°C | |
Dimension(L×W×H) | 90×64×34mm | |
Product Categories : Galvanometer Scanner
