3d galvo scanner laser for large scan field marking
Basic Info
Model No.: SG2206-3D
Product Description
3d Galvo Scanner Laser for large scan field marking
1. Beam input aperture is 10mm
2. It is used for 1064nm laser
3. Scan field is from 300mm * 300mm to 1600mm * 1600mm
4. Warranty: 18 months
5. The F-theta lens is original imported from American Two-Six Proprietary
6. The software we use is from Eastern Logic Inc, which is the biggest softwaredevelopment company in Taiwan
7. Smaller size, higher speed, zero drift and high precision
Motor Specification of 3d galvo scanner laser:
Working Temperature | 0 ℃ -45 ℃ | ||||
Linearity | 99.9% | ||||
Setting Time | ≤0.35ms | ||||
Scale Drift | <40PPM/ ℃ | ||||
Zero Drift | <15μRad./ ℃ | ||||
Long-term Drift over 8 hours | <0.5mRad. | ||||
RMS Current | 2.0A | ||||
Peak Current | 15A | ||||
Maximum Scan Angle | ±15° | ||||
Storage Temperature | -10 to +60 ℃ | ||||
Resolution | 12μRad | ||||
Repeatability | 8μRad | ||||
Input Aperture | 10mm | ||||
Motor Weight | 120g | ||||
Frequency | ≤1000Hz | ||||
Beam Displacement | 13.4mm |
Serve Driver Board Specification of 3d galvo scanner laser:
Input Voltage | ±15VDC | ||||
Interface Signals | Digital XY 2 -100 | ||||
Position Signal Input Resistance | 1KΩ±1% | ||||
Position Signal Input Scale Factor | 0.33V/° | ||||
Position Signal Output Scale Factor | 0.33V/° | ||||
Working Temperature | 0 ℃ -45 ℃ | ||||
Dimension(L×W×H) | 75×50×28mm |
Product Categories : 3D Dynamic Focusing Scanning System
Premium Related Products