Raytools Imported fused quartz 1064nm fiber laser arcoated protective windows lens laser protective window
Product Description
Raytools Imported fused quartz 1064nm fiber Laser arcoated protective windows lens laser protective window
Product Description
Specification of fiber laser protective lens
Package of fiber laser protective lens
Lens maintenance
1.Take out the protective windows draws
1. Loosen the two lock nuts on the protective mirror assembly by hand andpull out the protective mirror drawer ; 2. Note: Quickly seal the opening of the Laser Head after the lens is removedwith a non-stick protective film; 3. Put the protective glasses drawer (including protective lenses) in a cleanenvironment for ma intenance ; 4. Remove the protective film from the laser head. Insert the protective cover(including the lens) into the laser head flat and lock it; 5. Pay attention to the direction of the protective lens cover; 6. Lock the two lock nuts on the lens assembly by hand with proper strength.
2.Protective lens installation drawing
1.Retaining ring
3.Sealing ring
2.Protective windows
4.Support base
Attention: 1-3 parts should be taken out in the direction of the arrow, otherwise the parts will be damaged.
1. Remove the protective lens *After slightly removing #1 retaining ring, remove #2 protective lenses;.
*Put the #2 protective lens cover ina clean container. The mirror surfaceshould not be in contact with non-gaseous substances. 2. Clean protection lens *Use a dust-free cleaning stick to dip in isopropyl alcohol solvent to cleanthe protective lens, and then use the bellows to suck in the air; * Repeat many times until the lens is clean; * If the protection lens is no longer clean or damaged, it must be replacedwith a new lenso 3. Check the sealing ring *Check if the sealing ring is deformed or notched, it may cause air leakage.
*The sealing ring must not fall on the ground, etc. where there is dirt or dust.
4.Install protective lenses *Put the cleaned #2 protection lens carefully into the #4 support base.
*Put in #1 fixing ring, pay attention to check whether #3 sealing ring isunder the protective lens.
Product Paramenters
Specification | Material ( optional) | Two sides coating | Specification | Material ( optional) | Two sides coating |
24.9×1.5mm | JGS1, BK7, K9 | √ | 39×2.0mm | JGS1, BK7, K9 | √ |
27.9×4.1mm | JGS1, BK7, K9 | √ | 50×1.5mm | JGS1, BK7, K9 | √ |
30×5.0mm | JGS1, BK7, K9 | √ | 50×2.0mm | JGS1, BK7, K9 | √ |
37×7.0mm | JGS1, BK7, K9 | √ | 50×3.0mm | JGS1, BK7, K9 | √ |
21.5×2.0mm | JGS1, BK7, K9 | √ | 55×1.5mm | JGS1, BK7, K9 | √ |
22.35×4.0mm | JGS1, BK7, K9 | √ | 60×3.0mm | JGS1, BK7, K9 | √ |
37×7.0mm( 10-15kw) | JGS1, BK7, K9 | √ | 120×5.0mm | JGS1, BK7, K9 | √ |
19×3.0mm | JGS1, BK7, K9 | √ | 134×3.0mm | JGS1, BK7, K9 | √ |
26.8×2.0mm | JGS1, BK7, K9 | √ | 24×5.0mm | JGS1, BK7, K9 | √ |
27×2.0mm | JGS1, BK7, K9 | √ | 25.4×4.0mm | JGS1, BK7, K9 | √ |
30×1.5mm | JGS1, BK7, K9 | √ | 30×1.5mm | JGS1, BK7, K9 | √ |
30×1.6mm | JGS1, BK7, K9 | √ | 30×1.5mm | JGS1, BK7, K9 | √ |
38×2.0mm | JGS1, BK7, K9 | √ | 35×4.0mm | JGS1, BK7, K9 | √ |
38×3.0mm | JGS1, BK7, K9 | √ | 36×5.0mm | JGS1, BK7, K9 | √ |
36×5.0mm | JGS1, BK7, K9 | √ | 55×1.5mm | JGS1, BK7, K9 | √ |
50×2.0mm | JGS1, BK7, K9 | √ | 96×3.0mm | JGS1, BK7, K9 | √ |
Company Introduction
Workshop
Exhibition & Visiting
Packing&Shipping
FAQ
Q: Can I get some discount if I order more ?
A: Yes,The more you order,the more you save.
Q: How long is your delivery time?
A: When the order is confirmed, 3 working days for the small order, 10~15 days for the bulk.
Q:How to choose suitable model?
A:Please provide a photo of the product you used before or advise us your needs, we will give suggestion .
Q:What's your MOQ?
A:Normally one piece. If more, we can talk about discount. You can mix it with other Laser Machine Parts shipping together.
Q: What is your terms of payment ?
A: 100% in advance. Payment>=50000USD, 50% T/T in advance, balance before shippment.
Q: Can I get a sample to check the quality ?
A: Yes, we are glad to offer you sample for test, And there is a discount for Trade Assurance Sample Order.
Q: How long is your delivery time?
A: When the order is confirmed, 3 working days for the small order, 10~15 days for the bulk.
Q:How to choose suitable model?
A:Please provide a photo of the product you used before or advise us your needs, we will give suggestion .
Q:What's your MOQ?
A:Normally one piece. If more, we can talk about discount. You can mix it with other Laser Machine Parts shipping together.
Q: What is your terms of payment ?
A: 100% in advance. Payment>=50000USD, 50% T/T in advance, balance before shippment.
Q: Can I get a sample to check the quality ?
A: Yes, we are glad to offer you sample for test, And there is a discount for Trade Assurance Sample Order.
Product Categories : Fiber Laser Cutting & Welding Parts > Laser Protection Lens
Premium Related Products
Other Products
Hot Products
Hot Sale High Speed Galvo HeadJS2208 CO2 For Laser Engraving MachineHigh Precision marking Laser Galvo Scanner JS2808 For Jewelleryco2 laser control board for markingco2 galvo 3d headLaser marking machine high reliable laser scanner galvo laser diode module with long life spanLaser cleaning galvo scanner deeply clean metal surface rust and corrosionHigh speed and prescion auto focus galvo scanner for laser marking machine and engraving machineBeauty salon medical center portable multifractional RF CO2 fractional skin whitening machinehigh effective CO2 galvo mirror Sillion basic glass basic laser marking machine laser engraving machine1064nm yag f-theta scan lens use for laser marking machine20w 30w bearing fiber laser marking machine metal laser marking machineaperture 12mm yag laser scanner aperture 16mm digital co2 scanner best selling yag laser scanner for laser marking systemgood promotion fiber 1064nm galvo scanner galvo scanner mirror galvo scanner and controller7 joint articulated arm for laser RF CO2 fractional armlarge format dynamic focus laser galvo scanner CO2 10600nm laser20w Fiber Laser Max Fiber Laser high cost efficient fiber laser